Use routine cleaning, lubrication, needle replacement and inspection to protect stitch quality and reduce avoidable downtime.
Embroidery machines thrive on routine care. A quick clean and oil at regular intervals prevents most thread breaks, noise and wear.
Maintenance frequency depends on the machine model, hours, materials and environment. Follow the official manual first and use this page only as a general checklist.
Always use the manual for your exact model to confirm oil points, quantities, service intervals and safety procedures.
This is a general guide. The machine manual and service team provide the controlling maintenance instructions.
Remove lint and loose thread from the hook and bobbin area without damaging sensors or timing components.
Apply only the specified oil at the correct points and quantity. Over oiling can contaminate garments and attract debris.
Replace a needle when it is bent, damaged, dull or causing repeated stitch problems. Match the needle to the machine, thread and material.
Use only the oil type specified in the model manual or by FUJA technical support. Do not use household or general purpose lubricants.
There is no single interval for every application. Replace needles when damaged and establish a preventive schedule based on material, speed and production hours.
Stop and inspect the machine if noise changes. Check mounting, debris and approved lubrication points; contact support if the cause is unclear.
Keep the machine clean, dry and maintained according to the manual. Surface treatment reduces risk but does not eliminate corrosion from moisture or chemicals.
Yes. Provide the exact model, serial number, operating hours, materials and environment so the service team can recommend the right maintenance routine.