ACCESSORIES & SOFTWARE
Embroidery File Formats, Export Settings, and FUJA Compatibility Checks
Quick Answer
Confirm the file format and export settings supported by the exact controller version. Check dimensions, stitch data, colors and field fit before transfer. Opening the file successfully does not prove that the finished embroidery will meet requirements.
FUJA File Formats to Confirm
Ask which formats the exact FUJA controller and revision accept. Confirm requirements from matching documents before choosing export settings.
Confirm file formats, transfer methods and operating instructions for the exact controller and software revision. Do not treat DSB, DST, USB or WiFi as proof of compatibility with every configuration. Confirm required interface languages separately from the language or scope of human support.
- Record the controller and software revision
- Keep the approved source file and exported production file
- Verify the screen result before releasing the job
Export settings that affect sewing
Review dimensions, colors, trims and other exported stitch data. Confirm which information survives export and check the result on the actual controller.
Test the intended material at the finished design size. Inspect coverage, edges, registration, distortion, small details, thread condition and the reverse. Keep the approved source file, exported production file and revision record together so later edits do not replace the tested version unnoticed.
- Record the controller and software revision
- Keep the approved source file and exported production file
- Verify the screen result before releasing the job
Field size and stitch data checks
Check the file at finished size against the usable field and holding method. The nominal machine field does not prove that every product can fit.
Measure the largest recurring design and the most difficult product access separately. A large flat field may help with panels or jacket backs, but it does not prove suitable cap or shaped product access. Request a setup and sample using the intended holding method.
- Measure the recurring design and finished placement
- Identify the exact hoop, frame or support method
- Check product access and clearance with a representative setup
Transfer and file naming
Use the supported transfer method and clear file names with revision details. Confirm the loaded file rather than relying only on successful transfer.
Confirm file formats, transfer methods and operating instructions for the exact controller and software revision. Do not treat DSB, DST, USB or WiFi as proof of compatibility with every configuration. Confirm required interface languages separately from the language or scope of human support.
- Record the controller and software revision
- Keep the approved source file and exported production file
- Verify the screen result before releasing the job
Controlled sample and approval
Run the approved file on the intended materials and inspect the finished sample. Keep the accepted file and test conditions together.
Inspect placement, dimensions, color alignment, edges, coverage, distortion, thread condition and the reverse. Keep failed and approved samples when comparing changes. One controlled sample does not guarantee sustained output, other materials or an untested machine revision.
- Record the full test conditions
- Inspect preparation and the finished result
- State what the evidence does not prove
When to use FUJA technical support
Send the model, controller revision, file identity and observed problem when requesting help. Do not follow undocumented recovery or service instructions.
Keep unanswered requirements visible. Choose the next useful check, such as measuring the product, timing the complete job, requesting matching documents or reviewing a representative sample. Confirm important written conditions before making the decision.
- Identify the exact model and revision
- Separate changed and unchanged items
- Link the current document or support action
Frequently asked questions
Which file and transfer details should I confirm?
Confirm the accepted format and transfer method for your controller and software version. A file extension alone does not confirm design size, stitch settings, field fit or the sewing result.
What should I share with FUJA?
Prepare the model, controller and software versions, original and exported files, design size and intended material. Include the transfer step and any message shown so support can review the exact workflow.